Performance
- Engine Block
  When building an engine block for a Mazda MX-5, the first step is usually to install a set of connecting rods. The standard connecting rods are often the limiting factor for forced induction builds, whilst naturally aspirated engines spinning to high-RPMs benefit from stronger rod bolts to hold everything together. Aftermarket forged pistons offer both increased durability and a wide range of specifications to suit any build.
  
  Replacing the engine bearings with harder-wearing race variants can help to protect the engine during extreme operating conditions thanks to multiple design considerations that increase longevity. Piston rings are available in a variety of materials for standard and oversize pistons. Moly and chrome piston rings are suited to extreme operating conditions, with moly providing excellent oil retention characteristics.
  
  Any built engine block benefits from parts to increase the engine’s longevity. Harmonic dampers reduce the resonant vibrations in the crankshaft which can greatly impact crankshaft life if left unchecked. It is recommended practice for builds chasing extreme power or RPM to replace the standard oil pump gears —which are sintered in the NA & NB, and prone to shattering—with billet pieces.
  Bottom End Packages
  
  Connecting Rods
  
  Crankshafts
  
  Engine Bearings
  
  Harmonic Dampers
  
  Main Caps
  
  Oil Pumps
  
  Performance Fasteners
  
  Piston Rings
  
  Pistons
  
  Sump Baffles
  
  Intake System
  
  Individual Throttle Bodies
  
  Throttle Bodies
  
  Induction Kits
  
  Intake Manifolds
  
  Cylinder Head
- Cylinder Head
  Camshaft Pulleys
  
  Camshafts
  
  Cylinder Head Covers
  
  Followers & Shims
  
  Valve Springs
  
  Valves & Guides
  
  Driveline
  
  Gearbox Conversion Kits
  
  Limited Slip Differentials
  
  Driveshafts & Propshafts
  
  Performance Air Filters
  
  Ring & Pinion Gears
  
  Short Shifters
  
  Crankcase Ventilation
  
  Catch Cans
  
  PCV Systems
- Fuel System
  Fuel Additives
  
  Fuel Lines
  
  Fuel Pressure Regulators
  
  Fuel Pumps
  
  Fuel Rails
  
  Fuel Tanks & Parts
  
  Injectors
  
  Water Methanol
  
  ECU & Electronics
  
  Digital Dashes
  
  ECUs
  
  Gauges
  
  Ignition Coils
  
  Performance Sensors
  
  Trigger Wheels
  
  Wiring & Connectors
  
  Engine Swap Packages
- Exhaust Systems
  Whether it’s turbocharged, supercharged or naturally-aspirated, upgrading your stock MX-5 exhaust systems can do wonders for any Mazda. At BOFI Racing, we live and breathe MX-5s, as well as the many ways they can be tuned, from air filters to turbo kits and everything in between. Exhaust systems are no different, and we offer a wide array of exhaust system parts to improve your MX-5s performance. These include exhaust manifolds, back boxes, decat pipes and a tonne more!
  Back Boxes
  
  Cat-Backs
  
  Catalytic Converters
  
  Decat Pipes
  
  EGR Blanking
  
  Exhaust Bolts
  
  Exhaust Manifolds
  
  Exhaust Mounts
  
  Exhaust Gaskets
  
  Heat Shields
  
  Mid Pipes
  
  Cooling
  
  Air Ducts
  
  Fan Shrouds
  
  Re-Route Kits
  
  Radiators
  
  Oil Coolers
Forced Induction
- Turbocharging
  Here’s where you can find MX-5 turbocharging kits, turbos, wastegate actuators, turbo manifolds, blow off valves and everything else you could possibly need to turbocharge your little Mazda. It’s the job of the turbocharger to compress more air flowing into your MX-5’s engine, which allows more fuel to be added. The more air you can force into your engine, the more power you’ll get out of it.
  
  So, if you’re looking for a little extra oomph from your daily drive or for track days, turbocharging your MX-5 could be the perfect solution. At BOFI Racing, we offer an extensive range of MX-5 turbocharging parts, like the TD1 TD04 Turbo Kit for MX-5 NA & NB, and a selection of MX-5 boost controllers.
  Turbo Kits
  
  Adapters
  
  Blow Off Valves
  
  Boost Controllers
  
  Oil & Water Lines
  
  Turbo Accessories
  
  Turbo Fasteners
  
  Turbo Gaskets & Seals
  
  Turbo Manifolds & Downpipes
  
  Turbochargers
  
  Wastegate Actuators
  
  V-Band Clamps
- Supercharging
  Superchargers add significant power, while preserving the natural throttle response of your Mazda MX-5. In fact, fitting a supercharger is sometimes compared to the likes of fitting a much larger engine due to the amount of power added. At BOFI Racing, we offer a range of MX-5 supercharging parts — including the superchargers themselves, supercharger kits + fitting kits, bypass valves and supercharger pulleys.
  Supercharger Kits
  
  Bypass Valves
  
  Supercharger Fitting Kits
  
  Supercharger Pulleys
  
  Superchargers
- Intercooling
  Aluminium Pipes
  
  MX-5 Intercooler Clamps
  
  Intercooler Kits
  
  Intercoolers
  
  Silicone Hoses
- Heat Management
  Heat management is a very important, but often overlooked, aspect when building a car—especially if you want to give your engine a long life. Keeping heat away from your air intake isn’t just about preventing damage, it’s about unlocking more power and squeezing out more MPGs. It also cuts down the risk of heat damage to vital components in your engine bay.
  
  But it isn’t just the engine you need to be mindful of when it comes to heat management in an MX-5; the cabin of the car can get quite toasty without suitable protection. That’s why we recommend thermal barriers to keep you cool on long distance journeys and make warm track days significantly more comfortable.
  
  At BOFI Racing, we stock everything you need for proper heat management in your roadster, including exhaust wraps and turbo blankets, all of which are sourced directly from quality brands around the world. To learn more about how to keep engine temps down on your MX-5, have a gander at our dedicated blog.
  Exhaust Wrap
  
  Heat Reflective Tape
  
  Hose Protection
  
  Thermal Barriers
  
  Turbo Blankets
Servicing
- Engine
  Air Filters
  
  Belts & Chains
  
  Engine Fasteners
  
  Engine Gaskets & Seals
  
  Fuel Filters
  
  Fuses
  
  Ignition Leads
  
  Oil Filters
  
  Spark Plugs
  
  Sump Plugs
  
  Throttle Cables
  
  Valves & Solenoids
  
  Lubricants
  
  Engine Oil
  
  Gear Oil
  
  Greases
- Transmission
  If you’re fitting an LSD, looking for a lightened flywheel or simply changing the MX-5 shift boot, you’re in the right place for Mazda MX-5 transmission parts. Read More…
  
  An uprated clutch is always a good idea for boosted cars, they have holding power due to the higher clamping loads and better friction materials. We offer anything from a stage 4 puck clutch, which is great for drifters, to an OEM replacement organic clutch for daily driving. If you’re looking for a happy middle, take a look at the BOFI Racing clutch kit. We’ve developed this to hold all the power of a boosted car without sacrificing pedal feel. Anytime you change the clutch we’d recommend swapping the flywheel. This is especially true for 1.6 engines as most aftermarket clutches will have a larger diameter friction plate which may eclipse the OEM flywheel. An aftermarket flywheel will allow a larger diameter of the clutch to be fully utilised and allow for more torque to be sent to the wheels.Whether plate type or helical, fitting a limited-slip differential to your Mazda MX-5 has a dramatic effect on its cornering and handling capabilities. If you’re tracking the car, a plate type diff will ensure maximum adjustability and allow the entire rear axle to lock under load. For fast road and light track use, a helical diff will be perfect. This uses torque biasing to bias the engine torque to the slower wheel, ensuring you don’t get “one tyre fire”. Changing the shift boots on an MX-5 is a must, if no one has changed them already they may be split and allowing heat and noise to enter the cabin. Changing these will considerably quieten down the road noise and stop heat from the exhaust entering the cabin. We also stock everything you need to service and maintain your transmission assembly, from differential seals to clutch slave cylinders, you’ll find everything you need at BOFI Racing.
  Clutch Lines
  
  Clutch Cylinders
  
  Clutch Kits
  
  Flywheels
  
  Transmission Fasteners
  
  Gearbox Gaskets & Seals
  
  Gear Shifter
  
  Joints & Boots
  
  Speedo Gears
  
  Differential
  
  Differential Bearings
  
  Differential Fasteners
  
  Differential Mounts
  
  Differential Seals
  
  Fill & Drain Plugs
- Vision
  Glass Cleaner
  
  Screenwash
  
  Washer Bottles
  
  Wiper Blades
  
  Electrical
  
  Alternators
  
  Batteries
  
  Battery Trays
  
  Sensors
  
  Starter Motors
  
  Switches
  
  Window Regulators
- Cooling & Heating
  Coolant
  
  Coolant Hoses
  
  Cooling Fans
  
  De-Ionised Water
  
  Expansion Tanks
  
  Heater Matrix
  
  Radiator Caps
  
  Thermostats
  
  Water Pumps
  
  Additives & Cleaners
  
  Coolant Additives
  
  Engine Oil Additives
  
  Fuel Additives
  
  Gear Oil Additives
Running Gear
- Brake Friction
  Brake Discs & Pads Packages
  
  ABS Sensors
  
  Big Brake Kits
  
  Brake Hardware
  
  Brake Discs
  
  Brake Ducts
  
  Brake Lubricants
  
  Brake Pads
  
  Brake Stoppers
  
  Handbrake Cables
- Brake Hydraulics
  Bias Valves
  
  Bleed Nipples
  
  Brake Boosters
  
  Brake Calipers
  
  Brake Fluid
  
  Brake Lines
  
  Caliper Repair Kits
  
  Hydraulic Fittings
  
  Hydraulic Handbrakes
  
  Master Cylinders
- Steering
  Ball Joints
  
  Hubs & Bearings
  
  Knuckles & Angle Kits
  
  Power Steering
  
  Power Steering Fluid
  
  Steering Fasteners
  
  Steering Rack & Boots
  
  Steering Rack Bushes
  
  Steering Rack Spacers
- Suspension
  From upgraded anti-roll bars and fully adjustable MX-5 coilovers through to replacement boots, gaskets, bushes and drop links — here at BOFI Racing you’ll find everything you need to completely transform the ride and handling of your car.
  
  Our extensive range of MX-5 suspension parts is packed with top-notch upgrades and OEM replacement parts — so whether you’re modifying your car extensively or restoring it to standard spec, we’ve got you covered.
  Anti-Roll Bars
  
  Boots & Gaskets
  
  Coilovers
  
  Dampers
  
  Springs
  
  Drop Links
  
  Subframes
  
  Suspension Arms
  
  Suspension Bushes
  
  Suspension Fasteners
  
  Top Mounts
- Wheels & Tyres
  Wheels and tyres can make or break a car. Not only can they transform the way your MX-5 looks, they can dramatically improve its cornering performance, traction and stopping power. Not only do we stock a comprehensive range of aftermarket MX-5 wheels and tyres here at BOFI Racing, we also have all of the accessories you need to fit and maintain your new wheel and tyre combo. Check out the full lineup below.
  Alloy Wheels
  
  Spacers
  
  Spigot Rings
  
  Tyre Pens
  
  Tyre Pressure Gauges
  
  Tyre Valves
  
  Tyres
  
  Wheel Nuts & Studs
Body & Styling
- Interior
  Modifying the interior of your Mazda MX-5 not only looks great but can make you faster, too. Read More…
  
  Battling to hold yourself in your seat whilst the steering wheel slips through your hands doesn’t inspire much confidence. Unfortunately, Mazda had to compromise when launching the MX-5. They needed to be easy to get in and out off and the driving position needed to suit a wide range of body shapes.
  
  Because of this, the seats are unsupportive and the steering wheel is often too far away. Our range of Mazda MX-5 interior parts will put you in control, whether you’re a streeto hero, a track day terrorist or a real race driver. Being properly supported means you can put more effort into driving instead of simply holding on for dear life.
  
  Replacing the seat is the number one upgrade for your MX-5s interior. More than any other modification, not having to brace yourself against the dash and door means you can make better use of the controls. Harnesses keep you firmly in place with the anti-submarining straps on 6 point harnesses preventing internal organ damage. FIA certificated seats and harnesses are suitable for motorsport use.
  
  Replacing the steering wheel can transform the interior. With flat wheels, semi-dished and deep-dished wheels, the reach can be customised to achieve the perfect driving position. Leather steering wheels offer good levels of grip with bare hands, making them ideal for use on the road. Suede offers exceptional grip when used with motorsport gloves on the track.
  
  Gauges provide essential information on the operating conditions of the engine. Keeping an eye on your MX-5s water and oil temperatures ensures the engine does not overheat and cause permanent damage. Digital dashes and gauges display detailed data from standalone ECUs over CAN. Offering excellent value for money over 52mm gauges, they display huge amounts of information along with alarms, shift lights and much more.
  Boss Kits and Spacers
  
  Carpets & Mats
  
  Centre Console
  
  Gear Knobs & Handbrake Handles
  
  Hardtop Accessories
  
  Interior Accessories
  
  Interior Fasteners
  
  Pedal Covers
  
  Quick Releases
  
  Radio Cages
  
  Steering Wheels
- Exterior
  Badges & Stickers
  
  Body Panels
  
  Body Seals & Trim
  
  Bonnet Catches
  
  Boot Racks
  
  Chassis Braces
  
  Door Bushes
  
  Exterior Fasteners
  
  Vents & Louvres
  
  Mirrors & Windows
  
  Number Plates
  
  Slam Panels
  
  Sump Guards
- Styling
  Body Kits
  
  Bulbs
  
  Engine Dress-Up
  
  Front Splitters & Lips
  
  Grilles
  
  Instrument Cluster
  
  Lighting
  
  Oil Filler Caps
  
  Rear Valances & Diffusers
  
  Side Skirts
  
  Spoilers & Wings
- Safety
  Fire Safety
  
  Harnesses
  
  Roll Cages
  
  Seat Brackets
  
  Bucket Seats
  
  Tow Hooks
Workshop & Merch
Genuine Parts
Clearance

Performance
- Engine Block
  When building an engine block for a Mazda MX-5, the first step is usually to install a set of connecting rods. The standard connecting rods are often the limiting factor for forced induction builds, whilst naturally aspirated engines spinning to high-RPMs benefit from stronger rod bolts to hold everything together. Aftermarket forged pistons offer both increased durability and a wide range of specifications to suit any build.
  
  Replacing the engine bearings with harder-wearing race variants can help to protect the engine during extreme operating conditions thanks to multiple design considerations that increase longevity. Piston rings are available in a variety of materials for standard and oversize pistons. Moly and chrome piston rings are suited to extreme operating conditions, with moly providing excellent oil retention characteristics.
  
  Any built engine block benefits from parts to increase the engine’s longevity. Harmonic dampers reduce the resonant vibrations in the crankshaft which can greatly impact crankshaft life if left unchecked. It is recommended practice for builds chasing extreme power or RPM to replace the standard oil pump gears —which are sintered in the NA & NB, and prone to shattering—with billet pieces.
  Bottom End Packages
  
  Connecting Rods
  
  Crankshafts
  
  Engine Bearings
  
  Engine Mounts
  
  Harmonic Dampers
  
  Main Caps
  
  Performance Fasteners
  
  Performance Fasteners
  
  Piston Rings
  
  Pistons
  
  Sump Baffles
- Cylinder Head
  Camshaft Pulleys
  
  Camshafts
  
  Cylinder Head Covers
  
  Followers & Shims
  
  Valve Springs
  
  Valves & Guides
- Intake System
  Performance Air Filters
  
  Individual Throttle Bodies
  
  Induction Kits
  
  Intake Manifolds
  
  Throttle Bodies
- Driveline
  Driveshafts & Propshafts
  
  Gearbox Conversion Kits
  
  Limited Slip Differentials
  
  Ring & Pinion Gears
  
  Short Shifters
- Fuel System
  Fuel Additives
  
  Fuel Lines
  
  Fuel Pressure Regulators
  
  Fuel Pumps
  
  Fuel Rails
  
  Fuel Tanks & Parts
  
  Injectors
  
  Water Methanol
- Crankcase Ventilation
  Catch Cans
  
  PCV Systems
- ECU & Electronics
  Digital Dashes
  
  ECUs
  
  Gauges
  
  Ignition Coils
  
  Performance Sensors
  
  Trigger Wheels
  
  Wiring & Connectors
- Exhaust Systems
  Whether it’s turbocharged, supercharged or naturally-aspirated, upgrading your stock MX-5 exhaust systems can do wonders for any Mazda. At BOFI Racing, we live and breathe MX-5s, as well as the many ways they can be tuned, from air filters to turbo kits and everything in between. Exhaust systems are no different, and we offer a wide array of exhaust system parts to improve your MX-5s performance. These include exhaust manifolds, back boxes, decat pipes and a tonne more!
  Back Boxes
  
  Cat-Backs
  
  Catalytic Converters
  
  Decat Pipes
  
  EGR Blanking
  
  Exhaust Bolts
  
  Exhaust Manifolds
  
  Exhaust Mounts
  
  Exhaust Gaskets
  
  Heat Shields
  
  Mid Pipes
- Cooling
  Cooling is an essential part of any MX-5 build. Heat is the enemy, and a car that gets hot makes less power. Read More…
  
  BOFI Racing has a huge range of cooling parts and accessories for all Mazda MX-5s, from radiators and intercoolers to coolant reroutes and oil coolers. With everything you need to upgrade and improve your MX-5’s cooling, you can build a reliable endurance machine.The first item to replace is the ageing radiator. As the header tank turns a green-ish brown it becomes a ticking time-bomb. An aluminium radiator provides better cooling thanks to its increased surface area and greater volume. Matched to a powerful fan and a new thermostat, your car will cool effectively both on and off track.With a wide range of coolant hoses available, we have solutions to suit many different applications. Re-routes help circulate the coolant better, ensuring the block is cooled more evenly. Silicone radiator hoses replace ageing rubber that is prone to splitting and swelling. Lower radiator hoses make room for intercooler pipes where there usually is none.Where more cooling performance is required for your MX-5, oil coolers keep the oil temperatures down, improving lubrication and reducing wear. Oil coolers increase the engine’s ability to shed heat, doing it through a dedicated core instead of relying on the car’s radiator to do all the work. Thermostatic oil coolers ensure that they do not cool the oil until it has reached the desired operating temperature.Even the best coolers need to be ducted to ensure they work properly. Sealing all the gaps around each core directs all the air that enters the mouth through each, and not around them. Slam panels direct air through the radiator, increasing the system’s efficiency dramatically. Make use of weather stripping to seal any unwanted gaps and never pit due to overheating again.
  Air Ducts
  
  Fan Shrouds
  
  Re-Route Kits
  
  Radiators
  
  Oil Coolers
- Engine Swap Packages
Forced Induction
- Turbocharging
  Here’s where you can find MX-5 turbocharging kits, turbos, wastegate actuators, turbo manifolds, blow off valves and everything else you could possibly need to turbocharge your little Mazda. It’s the job of the turbocharger to compress more air flowing into your MX-5’s engine, which allows more fuel to be added. The more air you can force into your engine, the more power you’ll get out of it.
  
  So, if you’re looking for a little extra oomph from your daily drive or for track days, turbocharging your MX-5 could be the perfect solution. At BOFI Racing, we offer an extensive range of MX-5 turbocharging parts, like the TD1 TD04 Turbo Kit for MX-5 NA & NB, and a selection of MX-5 boost controllers.
  Turbo Kits
  
  Blow Off Valves
  
  Boost Controllers
  
  Adapters
  
  Turbo Gaskets & Seals
  
  Turbo Fasteners
  
  Oil & Water Lines
  
  Turbo Manifolds & Downpipes
  
  Turbochargers
  
  V-Band Clamps
  
  Wastegate Actuators
- Supercharging
  Superchargers add significant power, while preserving the natural throttle response of your Mazda MX-5. In fact, fitting a supercharger is sometimes compared to the likes of fitting a much larger engine due to the amount of power added. At BOFI Racing, we offer a range of MX-5 supercharging parts — including the superchargers themselves, supercharger kits + fitting kits, bypass valves and supercharger pulleys.
  Supercharger Kits
  
  Bypass Valves
  
  Supercharger Fitting Kits
  
  Supercharger Pulleys
  
  Superchargers
- Intercooling
  Aluminium Pipes
  
  MX-5 Intercooler Clamps
  
  Intercooler Kits
  
  Intercoolers
  
  Silicone Hoses
- Heat Management
  Heat management is a very important, but often overlooked, aspect when building a car—especially if you want to give your engine a long life. Keeping heat away from your air intake isn’t just about preventing damage, it’s about unlocking more power and squeezing out more MPGs. It also cuts down the risk of heat damage to vital components in your engine bay.
  
  But it isn’t just the engine you need to be mindful of when it comes to heat management in an MX-5; the cabin of the car can get quite toasty without suitable protection. That’s why we recommend thermal barriers to keep you cool on long distance journeys and make warm track days significantly more comfortable.
  
  At BOFI Racing, we stock everything you need for proper heat management in your roadster, including exhaust wraps and turbo blankets, all of which are sourced directly from quality brands around the world. To learn more about how to keep engine temps down on your MX-5, have a gander at our dedicated blog.
  Exhaust Wrap
  
  Heat Reflective Tape
  
  Hose Protection
  
  Thermal Barriers
  
  Turbo Blankets
Servicing
- Engine
  Air Filters
  
  Belts & Chains
  
  Engine Fasteners
  
  Fuel Filters
  
  Fuses
  
  Engine Gaskets & Seals
  
  Ignition Leads
  
  Oil Filters
  
  Spark Plugs
  
  Sump Plugs
  
  Throttle Cables
  
  Valves & Solenoids
- Transmission
  If you’re fitting an LSD, looking for a lightened flywheel or simply changing the MX-5 shift boot, you’re in the right place for Mazda MX-5 transmission parts. Read More…
  
  An uprated clutch is always a good idea for boosted cars, they have holding power due to the higher clamping loads and better friction materials. We offer anything from a stage 4 puck clutch, which is great for drifters, to an OEM replacement organic clutch for daily driving. If you’re looking for a happy middle, take a look at the BOFI Racing clutch kit. We’ve developed this to hold all the power of a boosted car without sacrificing pedal feel. Anytime you change the clutch we’d recommend swapping the flywheel. This is especially true for 1.6 engines as most aftermarket clutches will have a larger diameter friction plate which may eclipse the OEM flywheel. An aftermarket flywheel will allow a larger diameter of the clutch to be fully utilised and allow for more torque to be sent to the wheels.Whether plate type or helical, fitting a limited-slip differential to your Mazda MX-5 has a dramatic effect on its cornering and handling capabilities. If you’re tracking the car, a plate type diff will ensure maximum adjustability and allow the entire rear axle to lock under load. For fast road and light track use, a helical diff will be perfect. This uses torque biasing to bias the engine torque to the slower wheel, ensuring you don’t get “one tyre fire”. Changing the shift boots on an MX-5 is a must, if no one has changed them already they may be split and allowing heat and noise to enter the cabin. Changing these will considerably quieten down the road noise and stop heat from the exhaust entering the cabin. We also stock everything you need to service and maintain your transmission assembly, from differential seals to clutch slave cylinders, you’ll find everything you need at BOFI Racing.
  Clutch Cylinders
  
  Clutch Lines
  
  Clutch Kits
  
  Flywheels
  
  Transmission Fasteners
  
  Gearbox Gaskets & Seals
  
  Gear Shifter
  
  Joints & Boots
  
  Speedo Gears
- Differential
  Differential Bearings
  
  Differential Fasteners
  
  Differential Mounts
  
  Differential Seals
  
  Fill & Drain Plugs
- Electrical
  Alternators
  
  Batteries
  
  Battery Trays
  
  Sensors
  
  Starter Motors
  
  Switches
  
  Window Regulators
- Cooling & Heating
  Coolant
  
  Coolant Hoses
  
  Cooling Fans
  
  De-Ionised Water
  
  Expansion Tanks
  
  Heater Matrix
  
  Radiator Caps
  
  Thermostats
  
  Water Pumps
- Lubricants
  Engine Oil
  
  Gear Oil
  
  Greases
- Additives & Cleaners
  Coolant Additives
  
  Engine Oil Additives
  
  Fuel Additives
  
  Gear Oil Additives
- Vision
  Glass Cleaner
  
  Rain Repellent
  
  Screenwash
  
  Washer Bottles
  
  Wiper Blades
Running Gear
- Brake Friction
  Brake Discs & Pads Packages
  
  ABS Sensors
  
  Big Brake Kits
  
  Brake Hardware
  
  Brake Discs
  
  Brake Ducts
  
  Brake Lubricants
  
  Brake Pads
  
  Brake Stoppers
  
  Handbrake Cables
- Brake Hydraulics
  Bias Valves
  
  Bleed Nipples
  
  Brake Boosters
  
  Brake Calipers
  
  Brake Fluid
  
  Brake Lines
  
  Caliper Repair Kits
  
  Hydraulic Fittings
  
  Hydraulic Handbrakes
  
  Master Cylinders
- Steering
  Ball Joints
  
  Hubs & Bearings
  
  Knuckles & Angle Kits
  
  Power Steering
  
  Power Steering Fluid
  
  Steering Fasteners
  
  Steering Rack & Boots
  
  Steering Rack Bushes
  
  Steering Rack Spacers
- Suspension
  From upgraded anti-roll bars and fully adjustable MX-5 coilovers through to replacement boots, gaskets, bushes and drop links — here at BOFI Racing you’ll find everything you need to completely transform the ride and handling of your car.
  
  Our extensive range of MX-5 suspension parts is packed with top-notch upgrades and OEM replacement parts — so whether you’re modifying your car extensively or restoring it to standard spec, we’ve got you covered.
  Anti-Roll Bars
  
  Boots & Gaskets
  
  Coilovers
  
  Dampers
  
  Drop Links
  
  Springs
  
  Subframes
  
  Suspension Arms
  
  Suspension Bushes
  
  Suspension Fasteners
  
  Top Mounts
- Wheels & Tyres
  Wheels and tyres can make or break a car. Not only can they transform the way your MX-5 looks, they can dramatically improve its cornering performance, traction and stopping power. Not only do we stock a comprehensive range of aftermarket MX-5 wheels and tyres here at BOFI Racing, we also have all of the accessories you need to fit and maintain your new wheel and tyre combo. Check out the full lineup below.
  Alloy Wheels
  
  Spacers
  
  Spigot Rings
  
  Tyre Pens
  
  Tyre Pressure Gauges
  
  Tyre Valves
  
  Tyres
  
  Wheel Nuts & Studs
Body & Styling
- Interior
  Modifying the interior of your Mazda MX-5 not only looks great but can make you faster, too. Read More…
  
  Battling to hold yourself in your seat whilst the steering wheel slips through your hands doesn’t inspire much confidence. Unfortunately, Mazda had to compromise when launching the MX-5. They needed to be easy to get in and out off and the driving position needed to suit a wide range of body shapes.
  
  Because of this, the seats are unsupportive and the steering wheel is often too far away. Our range of Mazda MX-5 interior parts will put you in control, whether you’re a streeto hero, a track day terrorist or a real race driver. Being properly supported means you can put more effort into driving instead of simply holding on for dear life.
  
  Replacing the seat is the number one upgrade for your MX-5s interior. More than any other modification, not having to brace yourself against the dash and door means you can make better use of the controls. Harnesses keep you firmly in place with the anti-submarining straps on 6 point harnesses preventing internal organ damage. FIA certificated seats and harnesses are suitable for motorsport use.
  
  Replacing the steering wheel can transform the interior. With flat wheels, semi-dished and deep-dished wheels, the reach can be customised to achieve the perfect driving position. Leather steering wheels offer good levels of grip with bare hands, making them ideal for use on the road. Suede offers exceptional grip when used with motorsport gloves on the track.
  
  Gauges provide essential information on the operating conditions of the engine. Keeping an eye on your MX-5s water and oil temperatures ensures the engine does not overheat and cause permanent damage. Digital dashes and gauges display detailed data from standalone ECUs over CAN. Offering excellent value for money over 52mm gauges, they display huge amounts of information along with alarms, shift lights and much more.
  Boss Kits and Spacers
  
  Carpets & Mats
  
  Centre Console
  
  Gear Knobs & Handbrake Handles
  
  Hardtop Accessories
  
  Interior Accessories
  
  Interior Fasteners
  
  Pedal Covers
  
  Quick Releases
  
  Radio Cages
  
  Steering Wheels
- Exterior
  Badges & Stickers
  
  Body Panels
  
  Body Seals & Trim
  
  Bonnet Catches
  
  Boot Racks
  
  Chassis Braces
  
  Door Bushes
  
  Exterior Fasteners
  
  Mirrors & Windows
  
  Number Plates
  
  Slam Panels
  
  Sump Guards
  
  Vents & Louvres
- Styling
  Body Kits
  
  Bulbs
  
  Engine Dress-Up
  
  Front Splitters & Lips
  
  Grilles
  
  Instrument Cluster
  
  Lighting
  
  Oil Filler Caps
  
  Rear Valances & Diffusers
  
  Side Skirts
  
  Spoilers & Wings
- Safety
  Fire Safety
  
  Harnesses
  
  Roll Cages
  
  Seat Brackets
  
  Bucket Seats
  
  Tow Hooks
Workshop & Merch
Genuine Parts
Clearance
My Account
Blog
Help

MX-5 Running Gear

Upgrading your Mazda MX-5’s running gear is a sure-fire way to increase its performance on the road and track. Whilst lots of power makes for great straight-line speed, installing performance suspension, tyres and brakes ensure your MX-5s handles as well as it accelerates. Our entire range of running gear parts is hand-selected by us for their quality performance.

We reckon that every Mazda MX-5 deserves new suspension. Swapping the ancient springs and dampers for a fresh set of coilovers provides possibly the single greatest handling upgrade. Add a pair of adjustable anti-roll bars and a full suite of polyurethane suspension bushes and your MX-5 will corner like it is on rails!

Possibly the most important part of any build is the braking system. Having brakes that can cope with the newfound power and grip is paramount to staying safe on the road and track. More aggressive brake pads and MX-5 brake discs work better at extreme temperatures, ensuring you are able to stop when you need to the most. Big brake kits offer greater stopping power and increased heat-capacity for the most demanding drivers. View our full range of Mazda MX-5 parts and performance parts online.

Shop by Subcategory

Prazis Air Suspension for Mazda MX-5

Air Suspension

Brake Friction

obp Motorsport 0.625 Non-Integral Master Cylinder

Brake Hydraulics

Steering

MeisterR MX5 NA NB Coilovers

Suspension

SSR Speed Star MK-II 3 Piece Alloy Wheel

Wheels & Tyres

MX-5 Running Gear

UPGRADE
MADE IN UK

Hel Performance Braided Brake lines Mazda MX5 NA (Mk1) NB (Mk2)
£133.99 INC VAT
Add to basket
UPGRADE
MADE IN UK

Hel Performance Rear Subframe Hard Line Replacement Mazda MX5 NA (Mk1) NB (Mk2)
£26.46 INC VAT
Add to basket
GOOD QUALITY
UPGRADE
MADE IN UK

MTEC Drilled & Grooved 255mm Front Brake Discs (PAIR) Mazda MX5 NA (Mk1) NB (Mk2)
FROM: £76.99 INC VAT
Select options This product has multiple variants. The options may be chosen on the product page
UPGRADE
MADE IN UK

Hel Performance Rear Brake Lines Mazda MX5 NA (Mk1) NB (Mk2)
£78.06 INC VAT
Add to basket
UPGRADE
MADE IN UK

Hel Performance Braided Brake Lines Mazda MX5 NC (Mk3)
£133.99 INC VAT
Add to basket
GOOD QUALITY
UPGRADE
MADE IN UK

MTEC Drilled & Grooved 251mm Rear Brake Discs (PAIR) Mazda MX5 NA (Mk1) NB (Mk2)
FROM: £67.99 INC VAT
Select options This product has multiple variants. The options may be chosen on the product page
UPGRADE
MADE IN UK

Hel Performance Extended Front Brake Lines Mazda MX5 NA (Mk1) NB (Mk2)
£59.80 INC VAT
Add to basket
UPGRADE
MADE IN UK

Hel Performance Front to Rear Hard Line Replacement RHD Mazda MX5 NA (Mk1) NB (Mk2)
£48.52 INC VAT
Add to basket
UPGRADE
FREE UK DELIVERY
MADE IN JAPAN
-£66

Tein Street Advance Z Coilovers Mazda MX5 NA (Mk1) NB (Mk2)
Original price was: £660.00.Current price is: £594.00. INC VAT
Add to basket
UPGRADE
MADE IN UK

Hel Performance Hydraulic Handbrake Lines Mazda MX5 NA (Mk1) NB (Mk2)
£76.26 INC VAT
Add to basket
UPGRADE
MADE IN UK

Destroy or Die Steering Rack Lock Spacers Mazda MX5 NB (Mk2)
£10.00 INC VAT
Add to basket
GOOD QUALITY
UPGRADE
MADE IN UK

MTEC Drilled & Grooved 276mm Rear Brake Discs (PAIR) Mazda MX5 NB (Mk2)
FROM: £74.99 INC VAT
Select options This product has multiple variants. The options may be chosen on the product page
GOOD QUALITY
UPGRADE
MADE IN UK

MTEC Drilled & Grooved 270mm Front Brake Discs (PAIR) Mazda MX5 NB (Mk2)
FROM: £85.00 INC VAT
Select options This product has multiple variants. The options may be chosen on the product page
UPGRADE
MADE IN UK

Hel Performance Wilwood Dynalite Brake Lines Mazda MX5 NA (Mk1) NB (Mk2)
£52.93 INC VAT
Add to basket
UPGRADE
FREE UK DELIVERY
MADE IN JAPAN
-£93

Tein Flex Z Coilovers Mazda MX5 NA (Mk1) NB (Mk2)
Original price was: £936.00.Current price is: £842.40. INC VAT
Add to basket
UPGRADE
MADE IN UK

Hel Performance Subaru Caliper Brake Lines Mazda MX5 NA (Mk1) NB (Mk2)
FROM: £52.93 INC VAT
Select options This product has multiple variants. The options may be chosen on the product page
UPGRADE
MADE IN UK

Destroy or Die Extended Front Brake Lines Mazda MX5 NA (Mk1) NB (Mk2)
£69.14 INC VAT
Add to basket
UPGRADE
MADE IN JAPAN

Subaru WRX 4 Piston Front Caliper Mounting Bolt
£3.30 INC VAT
Add to basket
UPGRADE
MADE IN UK

Destroy or Die Steering Rack Lock Spacers Mazda MX5 NA (Mk1)
£10.00 INC VAT
Add to basket
GOOD QUALITY
UPGRADE
MADE IN UK

MTEC Drilled & Grooved 290mm Front Brake Discs (PAIR) Mazda MX5 NC (Mk3)
FROM: £82.99 INC VAT
Select options This product has multiple variants. The options may be chosen on the product page

Showing 1–20 of 113 resultsSorted by popularity

Check Out Our Blog for MX-5 Advice and News

MX-5 engine bay

Which MX-5 Engines, Gearboxes & Differentials Are the Strongest?

Ever wondered how much power or torque your MX-5’s engine and drivetrain could safely handle? If you’re planning to boost…

Coil On Plug Instructions for MS Labs and Motorsport Electronics ECUs

This guide covers the ECU setup required when fitting the M’z Labo Audi R8 or Toyota Yaris coil-on-plug conversion kits…

MX-5 engine tuning options

Turbo, Supercharger or N/A Power: What’s Best for Your MX-5?

It’s a debate that’s been raging for decades. Ever since the NA MX-5 launched in 1989, the tuning world has…

NB MX-5 on track

Which MX-5 Should I Choose For a Track Car Build?

The Mazda MX-5 is one of the most popular track day cars out there. Head to your local circuit and…

MX-5s in motorsport

How to Get Into Motorsport With Your MX-5

Special thanks to the BRSCC and James Roberts Photo for supplying some of the images used in this guide. Getting…